How Stairs Carpets Helps To Reduce Noise From Footsteps, Increase Safety And Make The Home Feel More Cosy?

 

Stairs are a high traffic area in most homes and carpeting can help to keep the noise levels down, reduce noise from footsteps and make the home feel more cosy. It also helps to increase safety, as wood is slippery, and can lead to a slip and fall that can cause serious injury.

With the constant use that stairs are subjected to in most homes, it is essential to choose a carpeting that will stand the test of time. This means choosing a durable fiber that will stand up to the abuse of footfalls and staining.

Maximum Durability

The durability of Stairs Carpets comes down to how tightly they are woven. The tighter the pile, the more dense it is and the better it will hold up under foot traffic. This means that a cut pile carpet is usually the best choice, but it is worth remembering that loop-cut piles can be just as sturdy and durable as a cut pile, with the added bonus of a wider range of styles to choose from.

A good rule of thumb is to choose a carpeting that is one shade or two shades darker than the paint color on the walls. This will help to disguise any areas of wear and tear that may occur between cleanings.

Needed For Stairs

Depending on the type of staircase you have, you can either go for full carpeting or a stair runner. Runners are generally easier to install and less expensive than full carpeting, but you will have to ensure that the carpet you choose is a suitable thickness for the width of the steps.

You should also consider the size of your stair nose, which is the rounded front section. Keeping this in mind when you are calculating how much of the carpet will fit your stairs will give you an idea of what size of stair you need to cover and where the tackless strips will be placed.

Strips Should Be Placed

In general, you will need to install a strip of padding on the riser of each step and another on the tread. You should also install a Stairs Carpets knee-kicker, which will help you stretch the carpet to get it as far into the inner corner of each step as possible.

Before you start, make sure to mark your stair outline in blue masking tape, to help you line up the tackless strips properly when you are ready to put down the carpet. This will make it easier to measure and put in the carpet and prevent unnecessary cuts.

Conclusion:

Once you have the stair outlined, you should measure two inches from the stair tread and trace straight lines along the steps, so that you know where to place the tackless strips when the time comes. This will help you to make sure that you are installing the carpet correctly and that it is not too long or too short, as this can cause slips and falls.